Handy Plumbing Tips & Tricks

Hair is the biggest culprit for shower drain clogs. Use a drain cover or strainer to catch hair before it enters your pipes, and clean it out regularly to prevent blockages.

While it may be tempting to use chemical drain cleaners for a quick fix, they can corrode your pipes over time. Instead, use a plunger or drain snake to remove clogs.

Monitor your water meter when no water is being used. If the meter continues to move, you might have a hidden leak somewhere in your plumbing system that needs attention.

A dripping faucet can waste a lot of water. Learn how to replace worn-out washers or cartridges to stop the leak and save on your water bill.

Silent toilet leaks can waste gallons of water daily. Add a few drops of food coloring to the toilet tank. If the color seeps into the bowl without flushing, you have a leak that needs fixing.

If you're leaving home for an extended period, consider turning off the water supply to prevent any potential leaks or flooding while you're away. This simple step can save you from major damage.

Winterize your home by insulating exposed pipes and letting faucets drip during freezing weather. This simple trick can prevent pipes from freezing and bursting, saving you from costly repairs.

If you hear banging or rattling sounds from your pipes, it could be due to loose or unsecured pipes. Use pipe insulation or straps to secure them and reduce noise. However, noise could also be pressure related, so it might be best to seek a consultation to confirm the issue.

Insulating hot water pipes reduces heat loss, allowing your water to stay warmer longer. This also helps prevent pipes from freezing in colder weather, especially in unheated areas.

Extend the life of your water heater by draining it annually to remove sediment buildup. This can improve efficiency and ensure you have hot water when you need it.

Sediment buildup in your water heater can reduce its efficiency and lifespan. Flushing your water heater once a year helps remove this sediment, keeping it in optimal working condition.

Hard water can cause mineral buildup in your pipes and appliances. Installing a water treatment can help reduce these deposits, extending the life of your plumbing system and improving water quality. If you have concerns about the quality of your water supply, we can perform testing.

Reduce water usage by installing low-flow showerheads, faucets, and toilets. These fixtures are designed to use less water without sacrificing performance, helping you save on water bills.

High water pressure can damage your pipes and appliances. Use a water pressure gauge to ensure your home's pressure is between 45-70 psi. Install a pressure regulator if needed.

Avoid running out of hot water by staggering the use of appliances that require hot water, such as the dishwasher and washing machine. This prevents overloading your water heater and keeps the supply consistent.

Avoid putting fibrous or starchy foods like potato peels, celery, and pasta down your garbage disposal. These can cause clogs and damage the blades. Stick to small, easy-to-grind items and always run cold water when using the disposal.